Bold Colored Vinyl Siding - Choosing The Right Product And Revitalizing Faded Vinyl

Posted on: 19 April 2016


If you want vinyl siding on your home, then you likely know that you have a wide variety of color options available to you. A dark teal or a vibrant cobalt blue will certainly add a bold pop of color to your house. However, you may be worried about the color fading over time. This is a real concern, especially if you do not want to end up with siding that appears chalky and bland after a few years. If you want the color to last, then use the tips below.

Choose The Right Material

The best way to make sure that the color across your vinyl siding will last for many years is to choose the right product in the first place. Vinyl siding used to be constructed out of single pieces of material. The color was mixed in with the PVC during the manufacturing process. However, this mixing process caused the colored pigments to absorb the sun, and the siding curled, warped, and faded over time. To prevent these sorts of problems, manufacturers switched to a fusion process where a layer of color is fused on top of the vinyl. PVC strips are first created and colored polymer materials are heat fused over the top. The polymer keeps its color for longer and it also increases the durability of the siding.

Make sure your vinyl siding manufacturer makes their siding with a PVC base and a polymer coating on top. Acrylic or acrylate polymers are best, since these materials are flexible and elastic. This means they are less likely to crack.

When you purchase your vinyl siding, you should also make sure that the product is considered colorfast. A product that is colorfast or has color retention will have a label on it that says ASTM D7856. This means that the product has gone through rigorous color retention testing in accordance with the American Society for Testing and Materials. Vinyl siding with the label will hold its color better than a siding material without it. 

Revitalize Siding 

Colorfast siding will stay bright for some years. However, it will dull over time due to oxidation and photodegredation. Your siding will appear chalky on the surface when this starts to occur, because the fading will cause the vinyl to dry out. You can revitalize the siding when it begins to degrade, so look for the chalky surface and wash the siding thoroughly. You will need to remove mold, mildew, and debris, so utilize white vinegar to do the cleaning. Place about four cups of vinegar in a five gallon bucket and fill it with warm water. Use a scrub brush to apply the vinegar mixture to the siding and scrub the debris away. Once the dirt and mildew is loosened, use a pressure washer on the lowest setting to rinse the siding.

Allow your siding to dry for 24 hours. Afterwards, purchase a large container of pure boiled linseed oil. This oil is a clear material made from the seeds of the flax plant. The material will add moisture to the siding to brighten the color. Just make sure that you purchase an organic or pure form of the boiled linseed oil. Otherwise, additives may be included that will cause the oil to yellow over time. Place a generous amount of the oil on a cotton rag and run the rag along the surface of the vinyl siding. The vinyl will appear brighter immediately afterwards. 

If you want bright and bold vinyl siding, then you should make sure that you pick a product that is colorfast with a polymer coating on top. You can also revitalize dull looking siding once it starts to fade with a good wash and the placement of linseed oil over the surface.  For more information, contact a company like Select Exteriors.